Lamp: Command line interface for OpsGenie

Lamp is a Go based command line utility to interact with OpsGenie service. It provides capabilities to create and close alerts, attach files, etc. 

Lamp is used to integrate any management tool that can execute a shell script with OpsGenie. Lamp interacts with the OpsGenie service through the RESTful Web API.

Lamp has a built in contextual help system for obtaining information on available commands, and available options for their use.  If you invoke lamp with the --help option, you will see the available list of commands. If you invoke lamp with the --help option with a specific command, you will see the options for that command.

For ease of use apiKey should be set in conf file that lamp will use, for some flexible use cases --apiKey parameter can also be used when executing lamp commands.

 
To migrate your Java based Lamp to Go Based Lamp you can refer to Migration Guide.

Installation

Prerequisites: 

  • OpsGenie account : If you don't already have one create an OpsGenie account
  • If you're downloading from source, OpsGenie Lamp requires Go version 1.4.1 or above. Golang can be downloaded from here. One should make sure the GOPATH and GOROOT variables are set accordingly.

OpsGenie Lamp is a Go based command line utility and can be obtained in two ways:

  • Downloading from source

    1. Lamp source can be downloaded via command
      go get github.com/opsgenie/opsgenie-lamp/...
    2. The command will automatically download and install necessary package files and dependencies under the src directory of the GOPATH. Then cd to Lamp's source directory and install lamp to GOPATH/bin via command
      go install

    Install command will produce an executable named "opsgenie-lamp", hence you should use "opsgenie-lamp" instead of "lamp" like following:

    opsgenie-lamp createAlert --message "host down"
  • Downloading Lamp Zip

    1. Download Lamp Zip
    2. Unzip lamp zip file which contains Lamp package into a directory.
      • For Windows use lamp.exe
      • For Linux use lamp
Internet Requirement : By default Lamp requires internet connection to reach OpsGenie.
If Lamp host server does not have internet connection you can configure Lamp Proxy settings, see below.
Marid can also be used as a proxy for Lamp.

Configuration

Application Configuration

Lamp is able to use configuration files in different locations. There are several ways to do it, and methods have an order:

  1. If you want to use a configuration file located in a custom location, you can define it in your commands.If Lamp command contains --config parameter, it uses the given file as configuration.
    opsgenie-lamp createAlert --message "host down" --config "/opt/conf/myConfigurationFile.conf"
  2. If there is no --config parameter defined, Lamp looks for an Environment variable: LAMP_CONF_PATH. If this environment variable is set, lamp uses the given file as configuration.
  3. If none of the methods given above works, Lamp uses the default <LAMP_HOME>/conf/lamp.conf file as configuration

The following are the common configuration settings for Lamp:

Lamp Configuration Settings
Setting Description Mandatory Default Value
apiKey API key used for authenticating API requests.
API key can be obtained by adding an API Integration

* Optionally --apiKey parameter can also be set when executing lamp commands, in this case the apiKey in the configuration file will not be used.
No -
user Default owner of the execution. If user is not specified for Lamp action this value will be used. No  
connectionTimeout Connection timeout for request executed across OpsGenie server No 50 Sec
requestTimeout Total timeout value of the request executed across OpsGenie server. It should be greater than connectionTimeout. No 100 Sec
Lamp Proxy Configuration Settings

In order to use Lamp on systems that are behind firewalls do not have direct access to the Internet, you need to configure Lamp proxy settings to interact with OpsGenie web services API, create alerts, etc. Marid can also be used as a proxy for Lamp.

Setting Description Mandatory Default Value
proxyHost Proxy host No -
proxyPort Proxy port No -
proxyUsername Proxy authentication username No -
proxyPassword Proxy authentication password No -
proxyProtocol Proxy connection protocol. It may be one of http or https depending on your proxy servers. No http
 
Lamp Log Configuration
Setting Description Mandatory Default Value
lamp.log.level Log level No warn
lamp.log.file Log file's name No lamp.log

Lamp log files can be written custom locations with custom names. And these methods also have an order.(Will be referred as LOGS_DIR in the rest of documentation):

Log directory specification methods

  1. To specify logs location, Lamp looks for an environment variable: LAMP_LOGS_DIR. If this environment variable is set, it writes logs to the specified path.
  2. If environment variable is not set, Lamp uses the default <LAMP_HOME>/logs directory.

Log file name specification methods

  1. If you specify lamp.log.file=customLogFileName.log in lamp configuration file, it will write logs with the given file name.
  2. If you don't specify any log file name in configuration, default log file name will be "lamp.log"

Usage


Create Alert Command

Lamp createAlert command is used to create alerts in OpsGenie. createAlert command takes the following parameters:

Mandatory Parameters

Parameter
--message Alert text limited to 130 characters

Optional Parameters

Parameter
--alias A user defined identifier for the alert and there can be only one alert with open status with the same alias. Provides ability to assign a known id and later use this id to perform additional actions such as log, close, attach for the same alert.
--actions A comma separated list of actions that can be executed. Custom actions can be defined to enable users to execute actions for each alert. All action executions will be posted to Outgoing Integrations like Webhook, Marid, Slack, HipChat etc
--source Field to specify source of alert. By default, it will be assigned to IP address of incoming request
--tags A comma separated list of labels attached to the alert.
--description Alert text in long form. Unlike the message field, not limited to 130 characters.
-D Additional alert properties. The syntax is -D <property name>=<property value>
--entity The entity the alert is related to.
--priority The priority of alert. Values: P1, P2, P3, P4, P5 default is P3
--user Owner of execution
--note Additional alert note
--apiKey API key used for authenticating API requests * If not given the api key in the conf file will be used 
Optional API key is valid for all Lamp commands
--configFile Location of a custom configuration file
-v Execute commands in verbose mode.

Sample Usage:

With mandatory parameters:
opsgenie-lamp createAlert --message "appserver1 down" --recipients john.smith@acme.com
With optional parameters:
opsgenie-lamp createAlert --message "appserver1 down" --recipients john.smith@acme.com  --description "appserver1 is not responding to requests and reported as down by the monitoring tools"  --tags "operations, servers" --actions "stop, restart" -D severity=critical 
With optional apiKey parameter :
opsgenie-lamp createAlert --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --message "appserver1 down"  --recipients john.smith@acme.com
With optional config and verbose parameter:
opsgenie-lamp createAlert -v --message "appserver1 down" --config "/opt/conf/myConfigurationFile.conf"

Close Alert Command

Lamp closeAlert command is close open alerts in OpsGenie. closeAlert command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be closed. Either id or alias must be provided
--alias Alias of the alert that will be closed. Either id or alias must be provided. 

Optional Parameters

Parameter
--user Owner of execution
--note Additional alert note
--notify Comma separated list of user and groups which will be notified. Also special values "all", "recipients" and "owner" is accepted.
--source Source of action
 

Sample Usage:

opsgenie-lamp closeAlert --id 44d2e383-df30-49e1-820e-65e8e6e6387f 
opsgenie-lamp closeAlert --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --alias appserver3Down

Delete Alert Command

Lamp deleteAlert command is delete alerts in OpsGenie. deleteAlert command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be deleted.

Optional Parameters

Parameter
--user Owner of execution
--source Source of action

Sample Usage:

opsgenie-lamp deleteAlert --id 44d2e383-df30-49e1-820e-65e8e6e6387f 

Get Alert Command

Lamp getAlert command is used to get alerts details from OpsGenie. getAlert command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be retrieved. Either id or alias must be provided
--alias Alias of the alert that will be retrieved. Either id or alias must be provided. Alias option can only be used open alert

Optional Parameters

Parameter
--output-format Retrieved alert can be printed as JSON and YAML format. Default value is json.
--pretty Boolean flag to print retrieved alert as pretty json.

Sample Usage:

opsgenie-lamp getAlert --id 44d2e383-df30-49e1-820e-65e8e6e6387f
opsgenie-lamp getAlert --alias appserver3Down
opsgenie-lamp getAlert --id 44d2e383-df30-49e1-820e-65e8e6e6387f --output-format yaml
opsgenie-lamp getAlert --id 44d2e383-df30-49e1-820e-65e8e6e6387f --pretty

List Alerts Command

Lamp listAlerts command is used to list alerts details from OpsGenie. listAlerts command takes the following parameters:

Optional Parameters

Parameter
--query Search query to apply while filtering the alerts. Details
--searchId id of the saved search to query with
--searchName name of the saved search to query with
--limit Page size. Default is 20. Max value for this parameter is 100.
--sortBy createdAt, updatedAt, default is createdAt
--offset Start index of the result set (to apply pagination). Minimum value (and also default value) is 0
--order asc/desc, default: desc
--output-format Retrieved alerts can be printed as JSON and YAML format. Default value is json.
--pretty Boolean flag to print retrieved alert as pretty json.

Sample Usage:

opsgenie-lamp listAlerts 
opsgenie-lamp listAlerts --query "status: open AND teams = 'devops'"
opsgenie-lamp listAlerts --query "tag: (graylog AND dynamodb)" --output-format yaml
opsgenie-lamp listAlerts --limit 5 --pretty

Count Alerts Command

Lamp countAlerts command is used to count the number of alerts at OpsGenie. countAlerts command takes the following parameters:

Optional Parameters

Parameter
--query Search query to apply while filtering the alerts. Details
--limit Page size. Default is 20. Max value for this parameter is 100.

Sample Usage:

opsgenie-lamp countAlerts --query "status: open"
opsgenie-lamp countAlerts --query "teams = 'devops'"
opsgenie-lamp countAlerts --query "tag: (graylog AND dynamodb)" --output-format yaml

List Alert Logs Command

Lamp listAlertLogs command is used to list alert logs from OpsGenie. listAlertLogs command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be retrieved. Either id or alias must be provided
--alias Alias of the alert that will be retrieved. Either id or alias must be provided. Alias option can only be used open alert

Optional Parameters

Parameter
--limit Page size. Default is 20. Max value for this parameter is 100.
--offset Starting value of the offset property.
--order asc/desc, default: desc
--output-format Retrieved alerts can be printed as JSON and YAML format. Default value is json.
--pretty Boolean flag to print retrieved alert as pretty json.

Sample Usage:

opsgenie-lamp listAlertLogs --id 37d2c2b0-a64f-4dbe-b592-df06e34e7683 
opsgenie-lamp listAlertLogs --id 37d2c2b0-a64f-4dbe-b592-df06e34e7683 --limit 5 --pretty
opsgenie-lamp listAlertLogs --id 37d2c2b0-a64f-4dbe-b592-df06e34e7683 --order asc

List Alert Notes Command

Lamp listAlertNotes command is used to list alert notes from OpsGenie. listAlertNotes command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be retrieved. Either id or alias must be provided
--alias Alias of the alert that will be retrieved. Either id or alias must be provided. Alias option can only be used open alert

Optional Parameters

Parameter
--limit Page size. Default is 20. Max value for this parameter is 100.
--order asc/desc, default: desc
--offset Starting value of the offset property.
--direction Page direction to apply for the given offset. Possible values are next and prev. Default value is `next`
--output-format Retrieved alerts can be printed as JSON and YAML format. Default value is json.
--pretty Boolean flag to print retrieved alert as pretty json.

Sample Usage:

opsgenie-lamp listAlertNotes --id 37d2c2b0-a64f-4dbe-b592-df06e34e7683 
opsgenie-lamp listAlertNotes --id 37d2c2b0-a64f-4dbe-b592-df06e34e7683 --limit 5 --pretty
opsgenie-lamp listAlertNotes --id 37d2c2b0-a64f-4dbe-b592-df06e34e7683 --order asc

List Alert Recipients Command

Lamp listAlertRecipients command is used to list alert recipients from OpsGenie. listAlertRecipients command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be retrieved. Either id or alias must be provided
--alias Alias of the alert that will be retrieved. Either id or alias must be provided. Alias option can only be used open alert

Sample Usage:

opsgenie-lamp listAlertRecipients --id 37d2c2b0-a64f-4dbe-b592-df06e34e7683 

Acknowledge Command

Lamp acknowledge command is used to acknowledge alerts in OpsGenie. acknowledge command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be acknowledged. Either id or alias must be provided
--alias Alias of the alert that will be acknowledged. Either id or alias must be provided. Alias option can only be used open alerts
 

Optional Parameters

Parameter
--user Owner of execution
--note Additional alert note
--source Source of action
 

Sample Usage:

opsgenie-lamp acknowledge --id 44d2e383-df30-49e1-820e-65e8e6e6387f 
opsgenie-lamp acknowledge --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --alias appserver3Down

Unacknowledge Command

Lamp unacknowledge command is used to unacknowledge alerts in OpsGenie. unacknowledge command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be unacknowledged. Either id or alias must be provided
--alias Alias of the alert that will be unacknowledged. Either id or alias must be provided. Alias option can only be used open alerts
 

Optional Parameters

Parameter
--user Owner of execution
--note Additional alert note
--source Source of action
 

Sample Usage:

opsgenie-lamp unacknowledge --id 44d2e383-df30-49e1-820e-65e8e6e6387f 
opsgenie-lamp unacknowledge --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --alias appserver3Down

Snooze Command

Lamp snooze command is used to snooze alert at OpsGenie. snooze command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be snoozed. Either id or alias must be provided
--alias Alias of the alert that will be snoozed. Either id or alias must be provided. Alias option can only be used open alerts
--endDate The date in ISO8601 format snooze will end. (e.g. 2017-06-13T16:54:42Z)
 

Optional Parameters

Parameter
--user Owner of execution
--note Additional alert note
--source Source of action
 

Sample Usage:

opsgenie-lamp snooze --id 44d2e383-df30-49e1-820e-65e8e6e6387f --endDate "2017-06-13T16:54:42Z"

Renotify Command (Deprecated)

Lamp renotify command is used to renotify alert recipients. renotify command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that recipient will be renotified for. Either id or alias must be provided
--alias Alias of the alert that recipient will be renotified for. Either id or alias must be provided. Alias option can only be used open alerts
 

Optional Parameters

Parameter
--recipients The user names of individual users or names of groups that will be renotified for alert. If no recipient specified, all existing alert recipients will be renotified.
--user Owner of execution
--note Additional alert note
--source Source of action
 

Sample Usage:

opsgenie-lamp renotify --id 44d2e383-df30-49e1-820e-65e8e6e6387f
opsgenie-lamp renotify --alias appserver3Down --recipients john.smith@xyz.com

Take Ownership Command (Deprecated)

Lamp takeOwnership command is used to take ownership of alerts in OpsGenie. takeOwnership command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be owned. Either id or alias must be provided
--alias Alias of the alert that will be owned. Either id or alias must be provided. Alias option can only be used open alerts
 

Optional Parameters

Parameter
--user Owner of execution
--note Additional alert note
--source Source of action
 

Sample Usage:

opsgenie-lamp takeOwnership --id 44d2e383-df30-49e1-820e-65e8e6e6387f 
opsgenie-lamp takeOwnership --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --alias appserver3Down

Assign Command

Lamp assign command is used to assign the ownership of alerts in OpsGenie. assign command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be assigned. Either id or alias must be provided
--alias Alias of the alert that will be assigned. Either id or alias must be provided. Alias option can only be used open alerts
--owner The users who will be the owner of the alert after the execution.
 

Optional Parameters

Parameter
--user Owner of execution
--note Additional alert note
--source Source of action
 

Sample Usage:

opsgenie-lamp assign --id 44d2e383-df30-49e1-820e-65e8e6e6387f --owner john.smith@acme.com
opsgenie-lamp assign --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --alias appserver3Down --owner john.smith@acme.com

Add Team Command

Lamp addTeam command is used to add new teams to alerts in OpsGenie. addRecipient command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that the new team will be added. Either id or alias must be provided
--alias Alias of the alert that the new team will be added. Either id or alias must be provided. Alias option can only be used open alerts
--team The team that will be added to the alert.
 

Optional Parameters

Parameter
--user Owner of execution
--note Additional alert note
--source Source of action
 

Sample Usage:

opsgenie-lamp addTeam --id 44d2e383-df30-49e1-820e-65e8e6e6387f --team operations
opsgenie-lamp addTeam --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --alias appserver3Down --team operations

Add Recipient Command

Lamp addRecipient command is used to add new recipients to alerts in OpsGenie. addRecipient command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that the new recipient will be added. Either id or alias must be provided
--alias Alias of the alert that the new recipient will be added. Either id or alias must be provided. Alias option can only be used open alerts
--recipient The recipient that will be added to the alert.
 

Optional Parameters

Parameter
--user Owner of execution
--note Additional alert note
--source Source of action
 

Sample Usage:

opsgenie-lamp addRecipient --id 44d2e383-df30-49e1-820e-65e8e6e6387f --recipient john.smith@acme.com
opsgenie-lamp addRecipient --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --alias appserver3Down --recipient john.smith@acme.com

Add Note Command

Lamp addNote command is used to add notes to alerts in OpsGenie. addNote command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be retrieved. Either id or alias must be provided
--alias Alias of the alert that will be retrieved. Either id or alias must be provided. Alias option can only be used open alerts
--note Note text
 

Optional Parameters

Parameter
--user Owner of execution
--source Source of action
 

Sample Usage:

opsgenie-lamp addNote --id 44d2e383-df30-49e1-820e-65e8e6e6387f --note "I'll work on this"
opsgenie-lamp addNote --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --alias appserver3Down --note "I'll work on this"

Add Tags Command

Lamp addTags command is used to add tags to alerts in OpsGenie. addTags command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be retrieved. Either id or alias must be provided
--alias Alias of the alert that will be retrieved. Either id or alias must be provided. Alias option can only be used open alerts
--tags A comma separated list of labels attached to the alert.
 

Optional Parameters

Parameter
--user Owner of execution
--source Source of action
--note Additional alert note
 

Sample Usage:

opsgenie-lamp addTags --id 44d2e383-df30-49e1-820e-65e8e6e6387f --tags "tag1, tag2"
opsgenie-lamp addTags --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --alias appserver3Down --tags "tag1, tag2"

Remove Tags Command

Lamp removeTags command is used to remove tags from alerts in OpsGenie. removeTags command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be retrieved. Either id or alias must be provided
--alias Alias of the alert that will be retrieved. Either id or alias must be provided. Alias option can only be used open alerts
--tags A comma separated list of labels attached to the alert.
 

Optional Parameters

Parameter
--user Owner of execution
--source Source of action
--note Additional alert note
 

Sample Usage:

opsgenie-lamp removeTags --id 44d2e383-df30-49e1-820e-65e8e6e6387f --tags "tag1, tag2"
opsgenie-lamp removeTags --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --alias appserver3Down --tags "tag1, tag2"

Add Details Command

Lamp addDetails command is used to add details to alerts in OpsGenie. addDetails command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be retrieved. Either id or alias must be provided
--alias Alias of the alert that will be retrieved. Either id or alias must be provided. Alias option can only be used open alerts
-D Additional alert properties. The syntax is -D <property name>=<property value>
 

Optional Parameters

Parameter
--user Owner of execution
--source Source of action
--note Additional alert note
 

Sample Usage:

opsgenie-lamp addDetails --id 44d2e383-df30-49e1-820e-65e8e6e6387f -D severity=critical

Remove Details Command

Lamp removeDetails command is used to remove details from alerts in OpsGenie. removeDetails command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be retrieved. Either id or alias must be provided
--alias Alias of the alert that will be retrieved. Either id or alias must be provided. Alias option can only be used open alerts
--keys A comma separated list of detail keys attached to the alert.
 

Optional Parameters

Parameter
--user Owner of execution
--source Source of action
--note Additional alert note
 

Usage:

opsgenie-lamp removeDetails --id 44d2e383-df30-49e1-820e-65e8e6e6387f --keys severity

Execute Alert Action Command

Lamp executeAction command is used to execute custom actions on alerts in OpsGenie. executeAction command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that the action will be executed on. Either id or alias must be provided
--alias Alias of the alert that the action will be executed on. Either id or alias must be provided. Alias option can only be used open alerts
--action Action to execute
 

Optional Parameters

Parameter
--user Owner of execution
--note Additional alert note
--source Source of action
 

Sample Usage:

opsgenie-lamp executeAction --id 44d2e383-df30-49e1-820e-65e8e6e6387f --action restartEntity
opsgenie-lamp executeAction --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --alias appserver3Down --action restartEntity

Attach File Command

Lamp attachFile command is used to attach file to alerts in OpsGenie. attachFile command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that the file will be attached. Either id or alias must be provided
--alias Alias of the alert that the file will be attached. Either id or alias must be provided. Alias option can only be used open alerts
--attachment Absolute or relative path to the file
 

Optional Parameters

Parameter
--user Owner of execution
--note Additional alert note
--source Source of action
 

Sample Usage:

opsgenie-lamp attachFile --id 44d2e383-df30-49e1-820e-65e8e6e6387f --attachment /tmp/lastHourCPUChart.png
opsgenie-lamp attachFile --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --alias appserver3Down --attachment /tmp/lastHourCPUChart.png

Escalate To Next Command

Lamp escalateToNext command is used to immediately process the next available rule in the specified escalation in OpsGenie. escalateToNext command takes the following parameters:

Mandatory Parameters

Parameter
--id Id of the alert that will be retrieved. Either id or alias must be provided
--alias Alias of the alert that will be retrieved. Either id or alias must be provided. Alias option can only be used open alerts
--escalationId Id of the escalation that will be escalated to the next level.
--escalationName Name of the escalation that will be escalated to the next level.
 

Optional Parameters

Parameter
--user Owner of execution
--source Source of action
--note Additional alert note
 

Sample Usage:

opsgenie-lamp escalateToNext --id 44d2e383-df30-49e1-820e-65e8e6e6387f --escalationName escalation_name


Heartbeat Command

Lamp heartbeat command is used send periodic heartbeat messages to OpsGenie. The heartbeat should be added to OpsGenie before sending a heartbeat, If a heartbeat with 10 minutes interval is added and OpsGenie does not get a heartbeat message within 10 minutes, OpsGenie creates an alert to notify the specified people. heartbeat command takes the following parameters.

For more information please refer to Heartbeat Monitoring and Heartbeat API pages.

Mandatory Parameters

Parameter
--name Name of the heartbeat on OpsGenie

Sample Usage:

opsgenie-lamp heartbeat --name ServerX

Enable Command

Lamp enable command is used to enable integrations and policies. enable command takes the following parameters.

Mandatory Parameters

Parameter
--id Id of the integration/policy that will be enabled. Either id or name must be provided
--type Type of the entity that will be enabled. It must be integration or policy.
--name Name of the integration/policy that will be enabled. Either id or name must be provided

Sample Usage:

opsgenie-lamp enable --id ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079
opsgenie-lamp enable --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --name "Nagios Integration"

Disable Command

Lamp disable command is used to disable integrations and policies. disable command takes the following parameters.

Mandatory Parameters

Parameter
--id Id of the integration/policy that will be disabled. Either id or name must be provided
--type Type of the entity that will be disabled. It must be integration or policy.
--name Name of the integration/policy that will be disabled. Either id or name must be provided

Sample Usage:

opsgenie-lamp disable --id ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079
opsgenie-lamp disable --apiKey ab5454992-fabb2-4ba2-ad44f-1af65ds8b5c079 --name "Nagios Integration"

Version Command

It prompts the current Lamp Version

Sample Usage 

opsgenie-lamp --version

Source

The source code is available at GitHub.